AG78 13′ Replacement Canopy


Replacement canopy for the AG78 13′ octagon cantilever umbrella.  It comes with a standard double wind vent and you can add an optional 8″ valance if you wish. Please allow approximately 10-12 weeks for this replacement canopy.  We have a 4800 Champagne without valance and 48011 Ridge Beach w/valance in stock that can ship out in 1-2 business days.   Per factory requirements stripped fabrics are only available if you order two canopies at a time for this model.  

Please scroll down for fabric options, installation video, delivery times and more information.



Click on an image for a larger view

Description / Measurement

Replacement canopy for the AG78 13' octagon cantilever umbrella.  It comes with a standard double wind vent and you can add an optional 8" valance if you wish. This comes in Grades A (Sunbrella, Outdura) Grade C (O’bravia). You will need to measure the long arm that supports the canopy from the end where it goes into the canopy pocket to the top hub where it connects.  It will meassure 79" from the end of the rib where it goes into the pocket of the canopy up to the hub where it connects to the umbrella.

Delivery Times

Please allow approximately 14-16 weeks for production and delivery.  

Video / Instructions

Please click on the guides below to assist in your repair or visit my YouTube Channel where there is a video demonstrating this repair.  

Download a instruction manual for replacing the canopy  AKZ AG28 Series Canopy Replacement

Fabric Warranty / Returns

Fabric (Furniture Grade) Limited Warranty. The following fabric lines have a limited warranty against fading for: 5 years – Sunbrella®/Outdura®/Sunbury® /Bella-Dura®/Docril®.  4 years – O’bravia®.  2 years – Solefin® There is a 20% re-stocking fee on returned canopies only if returned within 14 days of being received. Otherwise, all sales are final and no returns are allowed.  If you have any questions please contact us before ordering.

Grade A vs. Grade C

Grade "A" Sunbrella, Outdura and Docril Acrylic Fabric– Known for being the best material for umbrellas due to the durability and fade resistant nature of the material. Grade A material with a typical life span of 12+ years depending on climate. *5-year warranty on fading* Grade "C" O'Bravia Polyester Fabric- Quick drying fabric and less expensive than other material options. Grade C O’bravia fabric with a typical life span of 6+ years depending on climate. *4-year warranty on fading*

Care and Maintenance

MOST STAINS ON SOLUTION-DYED FABRICS CAN BE CLEANED UP WITH A MILD SOAP AND WATER SOLUTION. Solution-Dyed fabrics should be cleaned regularly before substances such as dirt, etc., are allowed to accumulate on and become embedded in the fabric. The fabric can be cleaned without being removed from the umbrella. Simply brush off any loose dirt, etc., clean with warm water (no more than 100° F) and a mild natural soap. Rinse thoroughly to remove soap. When using liquid detergent, it may be necessary to re-apply a water repellent treatment, such as 303 Hi Tech Fabric Guard. When washing or cleaning, DO NOT SUBJECT TO EXCESSIVE HEAT as the fabric will shrink. DO NOT STEAM PRESS OR DRY IN ELECTRIC OR GAS DRYERS. Allow fabric to air dry. In case SolutionDyed fabrics are stored during the winter season, it should be cleaned, allowed to air dry and stored in a dry, well ventilated area. To keep Solefin fabric (Grade D)looking fresh and new it should be washed periodically with detergent and water. Most stains can and should be cleaned up immediately after they occur. If, however, a spot or stain remains, clean with a solution of warm water and a mild detergent then rinse thoroughly. If necessary, apply laundry prewash, leave in for 10 minutes and then reapply warm water and detergent. After cleaning, always rinse thoroughly with water and allow to air dry. The fabric will dry quickly because it is a naturally water repellent material.